valve adjustment questions [Archive] - Toyota MR2 Message Board

pulley, valve, installed, timing, removed, order, adjustment, remove, belt, camshafts, clearance, shim, lining, crank, intake, shims, shown, choice, keyways, slides, alignment, upwards, guide, things, taking, putting, superior, vastly, pain, ideas, appreciated, greatly, correct, including, cams, install, shows, thing, image, http://img177.imagevenue.com/img.php?image=31930_shim_122_221lo.jpg, issue, lobes, issues, attached, lobe, reinstall, replacing, questions, 3sgte, intend

Hello, I have removed both my 264 HKS camshafts in my 3sgte from a 1990 SW20. The intake camshaft I have removed as I intend replacing it, as there were issues with the cam lobes. On one of the shims there is this issue as shown in this image: http://img177.imagevenue.com/img.php?image=31930_shim_122_221lo.jpg The BGB does the valve adjustment with the camshafts attached, so would I need to reinstall the intake cam that has the lobe problem,which caused the indentation as shown above